Vigor2910 Trung Tâm Xử Lý Máy Tính Tận Nơi, Bảo Trì Máy Tính Chuyên Nghiệp, Lắp đặt hệ thống camera, tổng đài điện thoại, hệ thống mạng, wifi, hệ thống quan sát, hệ thống chống chộm, thiết bị văn phòng...

Thông tin chi tiết của sản phẩm

The Vigor2910 series provides a configurable second WAN interface and supports policy-based load-balancing and connection fail-over on dual-WAN interface. Except the QoS function for the original IP layer, it also supports NAT session/bandwidth management which increases the usage efficiency of bandwidth greatly.
 

3G Application

DrayTek supports 3G HSDPA USB Modem via USB port of Vigor2910 series from firmware version V3.0.6 and above. It is a good application for the mobile sharing environment.

For 3G mobile communication through Access Point is popular more and more, Vigor 2910 adds the function of 3G network connection for such purpose. By connecting 3G USB Modem to the USB port of Vigor2910, it can support HSDPA/UMTS/EDGE/GPRS/GSM and the future 3G standard (HSDPA, etc). Vigor2910 with 3G USB Modem allows you to receive 3G signals at any place such as your car or certain location holding outdoor activity and share the bandwidth for using by more people. Users can use four LAN ports on the router to access Internet.

 

After connecting into the router, 3G USB Modem will be regarded as the second WAN port. However, the original Ethernet WAN1 still can be used and Load-Balance can be done in the router. Besides, 3G USB Modem in WAN2 also can be used as backup device. Therefore, when WAN1 is not available, the router will use 3.5G for supporting automatically. The supported 3G USB Modem will be listed on Draytek web site.

 

---

 

Smart VPN Client Application

Technical Specifications of Vigor2910 Hardware Interface LAN Maximum 4-port 10/100 Base-TX Switch WAN Maximum 2-port 10/100 Base-TX Ethernet USB 1-port USB for connecting to USB printer or 3G USB Modem Dual-WAN Outbound Policy-Based Load-Balance BoD (Bandwidth on Demand) WAN Connection Fail-over WAN Protocol DHCP Client Static IP PPPoE PPTP BPA L2TP Firewall CSM (Content Security Management) for IM/P2P Application Multi-NAT, DMZ Host, Port-Redirection/Open Port Policy-Based IP Packet Filter DoS/DDoS Protection IP Address Anti-Spoofing E-Mail Alert and Logging via Syslog Bind IP to MAC Address VPN Up to 32 VPN Tunnels Protocol PPTP , IPSec , L2TP, L2TP over IPSec Encryption MPPE AES Hardware-Based DES/3DES DHCP over IPSec IKE Authentication: Pre-shared Key and Digital Signature (X.509) NAT-Traversal (NAT-T) Dead Peer Detection (DPD) VPN Pass-Through LAN to LAN Teleworker to LAN Bandwidth Management Class-Based Bandwidth Guarantee by User-Defined Traffic Categories DiffServ Code Point Classifying 4-level Priority for Each Direction (Inbound/Outbound) Bandwidth Borrowed Bandwidth/Session Limitation Network Management Web-Based User Interface (HTTP/HTTPS) Quick Start Wizard CLI (Command Line Interface) / Telnet/SSH* Administration Access Control Configuration Backup/Restore Built-in Diagnostic Function Firmware Upgrade via TFTP/FTP Logging via Syslog SNMP Management with MIB-II Content Filter URL Keyword Blocking (White list and Black list) Java Applet, Cookies, Active X, Compressed / Executable / Multimedia File Blocking Web Content Filter (SurfControl) Time Schedule Control Network Features DHCP Client/Relay/Server Dynamic DNS NTP Client Call Scheduling RADIUS Client DNS Cache/Proxy UPnP Port-Based VLAN Configurable WAN2 Routing Protocol Static Routing RIP V2 Max. Power 10 Watt Dimension L220 * W160 * H36 ( mm ) Power DC 12V ~ 15V